新闻动态
玻璃钢喷淋管常见疑问操作方法
1、开端作业:先发动水泵,使设备中的射流压力雾化喷头向筒体内喷雾,才能让热烟气进入筒体。
1. Start the operation: first start the pump, so that the equipment in the jet pressure atomization nozzle spray into the cylinder, so that hot smoke into the cylinder.
2、停止作业:先不让热烟气进入简体,然后才能够封闭水泵。
2, stop operation: first, do not let the hot smoke enter the simplified body before closing the water pump.
3、除尘脱硫塔投入工作后,水泵不该封闭,让它一向喷雾。
3. After the dust removal and desulfurization tower is put into operation, the pump should not be closed, so that it is always sprayed.
4、运用脱硫塔有很多的尘沉降在水池内,因而要坚持池水洁净,特别不该当有塑料片、麦桔等物,以避免阻塞喷头(尘不会阻塞喷头)。
4. There are many dust deposits in the pool when using the desulfurization tower. Therefore, the pool water should be kept clean, especially when there are plastic sheets, wheat oranges and so on, so as to avoid blocking the nozzle (dust will not block the nozzle).
5、烟气中的二氧化硫和氮氧化合物与水联系后成酸性,酸性水不仅对脱硫塔作用有影响,并且对设备管道、水池运用寿命有影响,所以要加碱,使水池内的酸碱坚持在PH值10以上。
5. Sulfur dioxide and nitrogen oxides in flue gas become acidic after contacting with water. Acidic water not only affects the function of desulfurization tower, but also affects the service life of equipment pipes and pools. Therefore, alkali should be added to keep the pH value of acid and alkali in the pool above 10.

联系方式

  1. 电话:13393279368
  2. 手机:03175569729
  3. 地址:河北省泊头市人民公园对面

版权 © 沧州多特节能装备有限公司  网址:http://penlinguan.37ix.com.cn  推荐:沧州空压机,沧州节能空压机,沧州螺杆空压机

检查井模具 钢纤维 隔离墩模具 水泥电杆 玻璃钢拍门 静压造型线 保定网站建设保定做网站