1.包缠对接 这种街头形式是将两根管子对准，然后用浸透树脂的不同尺寸的增强材料（玻璃布、毡或毡加粗纱）包缠到适当的厚度和宽度。这种接头密封性好，能承受较大的内压力，通常用于连接直管、弯头、三通和渐缩管。 1. The wrapped docking Streets of this form is to aim the two pipes, and use of different size of saturating resin reinforced materials (glass cloth, felt, or felt with roving) wrapped to the proper thickness and width. This kind of joint is well sealed and can withstand greater internal pressure. It is usually used for connecting straight pipe, elbow, tee and taper pipe. 2.扩口承插连接 这种接头的设计是多种多样的。通常是将管子一端做成钟罩型扩口，而把下一接管插入其中，通常是用圆形（或其他形状）的橡胶垫圈密封，故此法有时称作“O型环”接头。 2. The design of expansion socket joints is diverse. Usually will make bell jar type flaring tube end, and insert the next took over, usually with a circular shape (or other) rubber gasket seal, therefore method is sometimes called "o-ring" connector. 3.套管连接 是用直径比管径稍大的套筒，内表面涂抹上胶泥，两根玻璃钢管外端部也涂上胶泥，而后把两根玻璃钢管插入套筒内，胶泥固化后即可使用。 3. The casing connection diameter is slightly bigger than the diameter of the sleeve, the inner surface daub on cement, two glass steel pipe end is also coated with cement, and then put two glass steel tube inserted into the sleeve, cement can be used after curing. 4.软管接头 这种接头仅是将一根橡胶套管套在两根管子对口处，套管两端分贝用不锈钢带箍住，并用螺丝紧固。 4. The hose connector is only used to cover the mouth of a rubber sleeve in two pipes, which is fastened with a stainless steel band at both ends of the casing and is fastened with screws.